Archoil Professional Petrol Service Pack v3

Archoil Professional Petrol Service Pack contains the below products:

• 1 x Archoil AR6400-P Max Polyetheramine Concentrate Professional Petrol Cleaner – 400ml
• 1 x Archoil AR9200 Advanced Friction Modifier & Oil Additive – 200ml
• 2 x Archoil AR6900-P Max Advanced Petrol Synthesis – 250ml
• 1 x Archoil AR2820 Professional Engine Flush – 250ml

Archoil AR6400-P Max Polyetheramine Concentrate Professional Petrol Cleaner

AR6400-P MAX is the most powerful cleaner in its class. It supersedes the original and proven AR6400 and continues to utilise the latest-generation detergent technologies blended from high-strength polyetheramine and PIBSI compounds. AR6400-P MAX rapidly and safely removes gum, varnish and carbon deposits from the fuel system and engine. The active PEA combined with an effective combustion improvement catalyst also helps remove post combustion hydrocarbon build-up whilst quickly reducing harmful exhaust emissions.

AR6400-P MAX quickly restores lost engine performance and fuel economy in addition to unique properties that help lubricate and protect surfaces from further deposit build-up. Molecule by molecule deposits are safely removed from intake valves, combustion chamber, piston tops, catalytic converter and O2 (lambda) sensors. AR6400-P MAX improves combustion efficiency and reduces the propensity for pre-ignition/pinking.

AR6400-P MAX is suitable for all 4-cycle gasoline engines, including ethanol blended fuels and biofuels. Not suitable for 2-cycle engines.

FEATURES / BENEFITS:

• Cleans Harmful Deposits
• Restores Fuel Injector Efficiency
• Restores Fuel Economy
• Restores Power and Performance
• Smooths Rough Idling
• Lowers Harmful Exhaust Emissions
• Reduces Octane Requirement

Archoil AR9200 V2 Nano MO-WS2 Friction Modifier

AR9200 V2 is a unique high performance, synthetic ester based additive pack utilising Molybdenum & Nano Tungsten Disulfide (Mo-WS2 ) next-generation lubrication technology, providing advanced anti-wear and friction modification properties to the engine oil in street petrol and diesel or race derived engines.

Synthetic Nano WS2 is one of the most lubricious substances in the world and combined with Molybdenum provides longer-lasting and far superior performance to conventional anti-wear additives. The load bearing ability of the surface treated with AR9200 V2 is extremely high at over 4,200,000 PSI with over 5,000,000 PSI shock load capability, 15 times more than the previous
generation Nano WS2.

AR9200 V2 penetrates and helps restore worn surfaces and the new lubricating micro-thin film provides an ultra-low coefficient of friction (COF 0.03) that prevents sticking, wear, corrosion and oxidation. It is suitable for use in all four stroke petrol or diesel engines, including turbocharged, direct injection, with or without particulate filter (DPF) or three way catalytic convertors (TWC). AR9200 V2 can be added to any viscosity class mineral or synthetic oil with low, medium or full SAPS rating.

FEATURES / BENEFITS

• Low & High Temperature Engine Protection
• Helps Restore Worn Surfaces & Reduces Wear
• Creates Lower Friction Surface (COF 0.03)
• Superior Shock Load Resistance – Over 5,000,000 PSI
• Excellent Penetrating Abilities
• Improves Engine Performance
• USAGE INSTRUCTIONS

Recommended treatment Ratio: 40ml AR9200 V2 per litre of engine oil. Acceptable variance +/- 10%.
One 200ml bottle will treat between 4.5 and 5.5L of engine oil.

Shake thoroughly before use. Bring engine up to full operating temperature. Add product and idle engine for 15 minutes. Then use vehicle or equipment normally.

Archoil AR6900-P Max Advanced Petrol Synthesis

AR6900-P MAX is an advanced fuel conditioner concentrate specifically designed to enhance the properties of modern petrol fuels. Utilizing technology from AR6400-P, AR6900-P MAX is the first conditioner of its kind to deliver polyetheramine (PEA) to each tank of fuel with the purpose of combating carbon build-up in port and direct injection petrol engines.

Direct injection engines in particular are prone to carbon build-up on the rear of inlet valves, that is very difficult to remove with single tank fuel cleaners. However, PEA is still partly active in post combustion gases so by delivering a continuous amount of PEA it can help inhibit build-up in these areas reducing the need for invasive strip down and cleaning.

AR6900-P MAX has been engineered to clean, lubricate and protect the fuel system whilst enhancing combustion performance through the use of Archoil’s combustion catalyst technology. AR6900-P MAX restores lost engine performance and fuel economy in addition to unique properties that help lubricate and protect surfaces from further deposit build-up.

Molecule by molecule deposits are safely removed from intake valves, combustion chamber, piston tops, catalytic converter and O2 (lambda) sensors. AR6900-P MAX improves combustion efficiency and reduces the propensity for pre-ignition/pinking. AR6900-P MAX is suitable for all 4-cycle gasoline engines, including ethanol blended fuels and biofuels. Not suitable for 2-cycle engines.

FEATURES / BENEFITS:

• Cleans Harmful Deposits
• Restores Fuel Injector Efficiency
• Improves Engine Performance and MPG
• Smooths Rough Idling
• Lowers Harmful Exhaust Emissions
• Improves Combustion Quality
• Reduces Octane Requirement

USAGE INSTRUCTIONS:

• Standard treatment ratio is 1:500. 100ml will treat 50 litres of fuel. A single 1 litre bottle will treat 500 litres of fuel.
• Enhanced performance treatment ratio is 1:250. 200ml will treat 50 litres of fuel. A single 1 litre bottle will treat 250 litres of fuel. If using continually at 1:250 then it is recommended that engine oil is changed more frequently.
• Add the correct amount of AR6900-P MAX to the fuel tank and then fill up with fuel immediately afterwards.
• Use continually with every fill up.

Archoil AR2820 Professional Engine Flush

AR2820 is designed to rapidly remove deposits from all types of petrol or diesel engine lubrication systems, before renewing the oil and/or before using any oil additives. AR2820 contains latest generation dispersants and carrier fluid to safely remove sludge, particulates, gum and varnish from the crankcase thus restoring engine compression and performance lost through deposit build-up.

Deposits are dissolved and held in suspension within the old lubricating oil and then disposed when the oil is drained. Renewed oil will last longer and the cleaner surfaces provide the optimum environment for any of the AR9000 series oil additive packs and friction modifiers. AR2820 is suitable for older and modern engines types including petrol, diesel and those with turbo chargers, catalytic converters or diesel particulate filters. AR2820 is non corrosive and compatible with engine materials and seals.

FEATURES / BENEFITS:

• Removes harmful crankcase deposits
• Prolonges oil life
• Restores lost engine compression resulting from deposit build-up